Most of these parts came from things I had around the house.
Materials
| Material | My Source |
| Wooden Cigar Box | Around the house |
| Fan 5v | Laptop Cooling Pad |
| Filter | Thrift Store $1 for 20 pieces |
| Switch | Cut from USB light from Thrift Store |
| LED | Home Stash-Previous project |
| Resistor 1.5k ohm | Home Stash-Previous project |
| Wires | Home Stash-Previous project |
| Belt | Home Stash- my closet |
| Screws-small blocks of wood | Home Stash |
| Button to finish LED | Home Stash-from clothing |
| Faux wood plastic tiles | Home Depot tile samples |
| Small Magnets/Washers for securing filter | Home Stash |
| Grill (back) | Metal mesh stationery holder |
Tools
Drill (top hole for LED, starter holes for screws to secure belt handle) Hammer/chisel (remove back from cigar box)
Screwdriver
Hot glue gun
Soldering iron
Scissors
Directions
Test fan with Soldering iron to see if smoke is extracted.
Cut back from cigar box using chisel device.
Drill holes in cigar box for LED
Place and glue guide blocks to provide housing for filter
Cut belt to provide handle
Screw belt to housing
Route switch, LED wires (led legs through button hole)
Solder switch, LED, Fan
Cut filter to rest inside box
Position Velcro to secure filter
Dimensions
Dimensions:
Cigar Box Housing 5.8 x 4.7 x 3.6 wall thickness .3
Fan 2.75 x 2.75 x .6
Filter – Cut to size
